How does Konax tackle biofilm in process water?

Konax combines a one-off shock treatment with PT4-approved products to microbiologically reset the pipe network, with continuous disinfection via the Konax Prodis based on chlorine dioxide (Easydis 2000 or Easydis 7500) to drinking water standards.

Are Konax process water installations monitored?

Yes, all installations are monitored online 24/7 via the Konax IoT platform.

Process water

Q: What causes bacteriological problems in industrial process water?

Bacteriological problems in process water are usually linked to biofilm on the inside of the pipes. Pathogens such as Salmonella, Pseudomonas, E. coli and Legionella feed on this biofilm layer and are protected by it against conventional disinfection.

Source contamination vs system contamination

There are many disinfection technologies, each with their own advantages and disadvantages. The choice of the right technology depends, among other things, on the origin of the contamination. Is it a source contamination or a system contamination?

System contamination

Biofilm: the invisible threat

In bacteriological problems in process water, the cause is usually linked to the biofilm built up on the inside of the pipes. Pathogens such as Salmonella, Pseudomonas, E. coli and Legionella grow in this slimy biofilm and are protected by it against traditional disinfection.

An effective approach is only possible if the biofilm is completely removed and the bacteria present are killed.

Chlorine is insufficient

Traditional disinfectants do not penetrate the biofilm

Persistent recontamination

Biofilm grows back quickly after occasional cleaning

Quality problems

Contamination affects product quality and increases health risks

Our solutions

Two complementary steps to tackle biofilm in the pipe network.

Shock treatment

A one-time cleaning and disinfection of the pipe network with PT4-approved products resets the pipes microbiologically. These products penetrate the biofilm to kill pathogens.

Removes both historical and recent contamination
Suitable after stagnation or in case of severe contamination
Post-treatment at drinking water concentrations possible

Konax Prodis M35 for continuous disinfection of process water

Continuous disinfection via Prodis

Continuous disinfection with the Konax® Prodis, based on chlorine dioxide (Easydis 2000 or Easydis 7500), is one of the most efficient ways to disinfect water according to drinking water standards. Both free bacteria and biofilm are continuously kept under control.

Low dosages, high effectiveness
Safe use during production processes
Automatic monitoring via Konax® Connector or Prodis

Source contamination

A gatekeeper as a barrier against microbiology

Biofilm formation begins at the source. Alternative water sources such as rainwater and well water generally carry a higher bacteriological load than tap water. A gatekeeper at the source eliminates these germs before they ever reach your pipe network.

First barrier

Treats the water at the source, before it enters your installation.

Continuously controlled

Keeps sources with variable or high germ loads in check.

No biofilm

Prevents bacteria from entering and building up biofilm.

Flexibly deployable

With UV, ultrafiltration, chlorine or chlorine dioxide, depending on the source quality.

Black PVC storage tanks for process water with piping

Installations

The right setup for your situation

Drag or scroll sideways to view all setups

Simple dosing unit

Manual dosing with a simple unit, suitable for smaller volumes or as a starting solution.

This can be done with hydrogen peroxide, sodium hypochlorite, chlorine dioxide, …

+ Konax Connector for online monitoring

Konax® Prodis

Fully automatic unit with data-driven technology. Measurement of multiple parameters, integration with inline sensors and full integration with the Konax IoT platform.

Up to 8 parameters monitored
Treats multiple circuits
Produces its own disinfectant
Dashboard on PC and smartphone

Konax® Prodis Skid

Konax Prodis on a stainless steel skid, designed for the food industry.

Konax UV

UV disinfection for continuous treatment of the water source, without adding chemicals.

Gatekeeper at the source

Konax UF

Ultrafiltration as a physical barrier that keeps bacteria and particles out of the source water.